CROSS5 RACING - Ultralight and robust FPV Drone Racing frame
CROSS5 RACING - Ultralight and robust FPV Drone Racing frame
KEY FEATURES:
ultra light yet durable construction
extra strong 4.5 mm thick “Artisan” 3k Full Woven CF arms
several different canopy variations, including durable 3d printed TPU canopies (see info about package below)
interlocked arms, no wobbling
Main specifications and features:
True X type frame
209 mm MTM
80 grams weight including hardware depending on variant
25 mm high stack
30.5x30.5 and 20x20 stacks
mounting options
up to 5.2 inch props
Micro sized cams
Bottom battery mounting
Description:
One of the smallest and lightest CrissCrossFPV drone frames . Perfect for hardcore FPV Drone Racing thanks to construction’s lightness and durability.
Thoughtful design, simple construction and attention to details don't let you loose time during assembling or on rush repair between races.
Arms can be changed with only one screw removed, due special cut-out in the end of the arm.
For production of arms were used custom T700 Toray “Artisan” 3k Plain Full Woven CF sheets. In bench strength test, these arms showed up to 50% of strength increase over arms made from conventional 3k / UD CF composite sheets.
Unique "TrippleScrew" feature help to reduce level of vibration transitioned from motors to FC. Arms and stack are fixed separately.
Little spikes on the tips of arms are protecting motors from damages and helping to keep drone from sliding out of starting platform at vertical starts.
In the rear side of the middle plate located small ear for fixing of battery wires.
Each frame kit is supplied with long Nylon screws, anti-vibration o-rings and Low ESR Rubycon capacitor.
All plates and arms have chamfered edges, they are nice to touch and safe for wires.
Top and bottom plates are mounted with countersunk screws. That makes surface flat and allows easy and unobstructed mounting of battery.
Frame is developed within CrissCrossFPV's "Light Weight - Low Drag" vision.
Top materials used only, see details below.
Happy flying!!!
Main package :
set of CF parts made from T700 3k/UD and “Artisan” CF sheets, highly polished and all chamfered
set of 25 mm long 7075 T6 Aluminium standoff
set of steel hardware
3D printed arm guards
3D printed VTX antenna mount
3D printed canopy
Bonus accessories included:
1x 20x220mm Polyester battery straps with non-slip silicone layer
1x low ESR Rubycon 35V 1500uF capacitor
1x set of anti-damping o-rings with long nylon screws for stack
Recommended FPV drone building parts:
2306/ 2207 high Kv motors
Aikon F7 mini 20x20 Flight Controller
Aikon AK32PIN 32Bit 35A 2-6S 20x20 4in1 ESC
RunCam Racer2 Micro camera
TBS Unify Nano Vtx
TBS Crossfire Nano Rx
IMPORTANT NOTICE:
All frames are produced locally in Austria based on received orders. Please, allow us 2-5 days for production in case no stock items are available.
Any personalization and modification to the frame parts and 3D printed parts are available without additional fee.
