Description:

CROSS5 CLASSIC- is the smallest and lightest CrissCrossFPV drone frames with dual purpose. Good for FPV Drone Racing, but can be used as a valid platform for aggressive Freestyle and high speed chase HD video footage.

Frame have mount for universal adjustable HD cam pod specially designed for use on most of CrissCrossFPV frames.

Thoughtful design, simple construction and attention to details don't let you loose time during assembling or on rush repair between races.

Arms can be changed with onle one screw removed, due special cut-out in the end of the arm.

For production of arms were used custom T700 Toray “Artisan” 3k Plain Full Woven CF sheets. In bench strength test, these arms showed up to 50% of strength increase over arms made from conventional 3k / UD CF composite sheets.

Unique "TrippleScrew" feature help to reduce level of vibration transitioned from motors to FC. Arms and stack are fixed separately.

Little spikes on the tips of arms are protecting motors from damages and helping to keep drone from sliding out of starting platform at vertical starts.

In the rear side of the middle plate located small ear for fixing of battery wires.

Each frame kit is supplied with long Nylon screws, anti-vibration o-rings and Low ESR Rubycon capacitor.

All plates and arms have chamfered edges, they are nice to touch and safe for wires. 

Top and bottom plates are mounted with countersunk screws. That makes surface flat and allows easy and unobstructed mounting of battery.

Frame is developed within CrissCrossFPV's "Light Weight - Low Drag" vision.

Top materials used only, see details below.

Happy flying!!!

Main package :

• set of parts made from Toray T700 “Artisan” 3k and 3k/UD Plain Full Woven CF sheets, highly polished and chamfered

• set of 7075 T6 Aluminium standoffs

• set of steel hardware

• 3D printed arm guards (for CINEMA and RACER versions)

• 3D printed VTX antenna mount (for CINEMA and RACER versions)

• 3D printed Canopy insert with Fin (for Racer version)

• 3D printed GoPro Hero6,7,8 universal slim mount (for CINEMA version)

Bonus accessories included:

• 1x 20x220mm Polyester battery straps with non-slip silicone layer

• 1x low ESR Rubycon 35V 1500uF capacitor

• 1x set of anti-damping o-rings with long nylon screws for stack

Recommended FPV drone building parts:

• 2306/ 2207 high Kv motors

• Aikon F7 mini 20x20 Flight Controller

• Aikon AK32PIN 32Bit 35A 2-6S 20x20 4in1 ESC

• RunCam Racer2 Micro camera

• TBS Unify Nano Vtx

• TBS Crossfire Nano Rx

IMPORTANT NOTICE:

All frames are produced locally in Austria based on received orders. Please, allow us 2-5 days for production in case no stock items are available.

Any personalization and modification to the frame parts and 3D printed parts are available without additional fee.