Golden Bee is universal All-in-One FPV drone frame.
Extremely robust, reasonably light and compact. Has low frontal area with minimum drag.
Can be used everywhere, but best suited for big racetracks with long straights and “bando” freestyle, where strength and durability is required.
V3.0 Golden Bee frame have new features:
- Arms with two mounting option for TrueX or Stretched X frame layout
- Middle plate adds even more rigidity and strength
- New camera canopy design
As well I started to offer custom paint job for CF parts. More info can be found here.
Main specifications and features:
- True X/ Stretched X type frame
- 215/ 225 mm MTM (TrueX/ StretchedX)
- 108 grams weight including hardware
- Bottom battery mounting
- 20 + 8 mm height double stack, plus deck for RX/ TX on the canopy
- 30.5x30.5 and 20x20 stack mounting options
- 5.2 inch props
- up to 24xx motors
- up to 5s 1800mAh battery
- for Micro sized cams
- up to 90 deg. rotation angle of camera
CrissCrossFPV drone frames with Hybrid arms are result of constant design, testing and development in pursuit of excellence. FPV drones frames with Hybrid arms were created with "Durability First" idea, following rest of CrissCrossFPV's values - low drag, light weight, elaborate design and diversity of options.
Golden Bee hybrid arms FPV drone frame is a small tank, that best suited for exploring of abandoned sites or freestyling around trees. Have no fear to send it against concrete or metal, it will easily hold any crash.
Hybrid arms combining best of the other types of drone arms - regular and vertical. They are easy to assemble and use as regular arms, in the same time they has minimal frontal area and low drag same as vertical arms. Additionally to all above mentioned properties Hybrid arms are extremely durable and strong, with ability to withstand high velocity impacts and are almost indestructible.
Due bottom battery mounting position and vertical alignment of the whole frame, Golden Bee has CG located in the middle. It has neutral feel and will perform with same response for gliding, looping, diving from one side and cruising, distance tracking, follow footage on the other.
Standard stack height is 20 mm enough to install any ESC and FC. Additionally to that there is a special double deck inside of canopy for RX and TX. But still you can use different sized standoffs for more space or more compact build.
Middle plate significantly improves overall frame rigidity and resistance to torsion.
Some of electronic components can be installed between bottom and middle plates, that saves space and gives protection.
Golden BeeV3.0 frame is featuring new arms with two mounting options. Frame can be assembled as TrueX or Stretched X layouts.
All plates and arms have chamfered edge, they are nice to touch and safe for wires.
Top and bottom plates are mounted with countersunk screws. That makes surface flat and allows easy and unobstructed mounting of battery.
Camera holding plates are with holes for universal adjustable GoPro Session protection pod specially designed for use on most of CrissCross.Design FPV frames.
Top materials used only, see details below.
- 4x hybrid arms made from 8mm Toray T700 0-90 Plain/ UD high gloss carbon sheet
- 1x top plate made from 2mm Toray T700 0-90 Plain/ UD high gloss carbon sheet
- 1x bottom plate made from 2mm Toray T700 0-90 Plain/ UD high gloss carbon sheet
- 4x FPV camera mounting plate made from 2mm Toray T700 0-45-90 Plain/ UD high gloss carbon sheet
- 1x FPV camera middle mounting plate made from 2mm Toray T700 0-45-90 Plain/ UD high gloss carbon sheet
- 1x set of assembling hardware
- 1x Polyester battery straps with silicone layer
- 1x low resistance 1500uF 35V capacitor
Recommended FPV drone building parts:
- 2306/ 2207 2450kV or higher motors
- any F3, F4, F7 FC's, including big All-in-One controllers
- any 4-in-1 ESC
- any Micro sized cameras
- TBS Unify V3 or Nano vtx
- FR.Sky R-XSR Receiver
- GoPro Hero series cam pod, two versions, centered and offset, for download click on picture:
- GoPro Session series cam pod, two versions, front or side cam insertion, for download click on picture:
- Arms and motors protection covers (right and left), for download click on picture:
- AXii antenna mount